3 Review(s)

One part of the strip has 1 Meter adhesive tape inbuilt. Just peel off the 3M adhesive tape backing and stick the strip at your required place100 Cm length is more than enough for common doors. You can cut the strip using a scissor as per your required length. Length – 100 Cm, Width – 45 mm (Out of this 25mm is covered with the adhesive tape on one side). Installation instructions included with the pack?Once installed, if you want to remove it and reinstall, you need to buy double sided tape roll from your local stores or online. It can be easily removed by pulling it with little force. The double-sided tape does not damage your door or window?COVERAGE: It Covers the Gap Between 0 To 20Mm.It Can Be Fit On Almost Every Door Type Pvc/Wooden/Fabricated/Glass/Steel/Metal.?ZERO RISK: Zero Chances Of Breathing Issue Which Is the Most Common Problem In Other Rubber Seals. Zero Maintenance Cost In the Life Span Of 10 Years. Zero Scratches On the Floor.?INSTALLATION: Step 1- Measure your Door Step; Step 2 - Adjust/Cut Door Seal as per Door Size with the Normal Metal Cutting Blade; 3 - Install the Door Seal with Screws.