3 Review(s)

The HAND LIFTER (LIPTER) is a sewing kit part for the Juki 8700 sewing machine. It is used to lift the presser foot to a desired height using the knee. The standard height of the presser foot lifted using the knee lifter is 10 mm. The presser foot lift can be adjusted up to 3 mm using the knee lifter adjust screw. The maximum presser foot lift for the A type is 9 mm. When the presser foot lift is adjusted to over 10 mm, it is important to ensure that the bottom end of the needle bar is at its lowest position and does not hit the presser foot.