3 Review(s)

Multi-Function Telephone Tool Crimps. Multi-function telephone tool crimps, cuts and strips for easy on-the-job tool application.The steel frame gives long term durability and dependability. Provides easier and faster operation.For RJ-45/11 modulator connector steel frame ,Durable, Light Multi-Use Crimping Tool.Suitable For Network Cable With Rj45 Connector And Adsl Cable With Rj11 Connect. Suitable For Cat5 And Cat5e Cable With 8p8c, 6p6c And 4p4c Plugs For Network Installations Up To 100Mbps 10base-T Ethernet And Token Ring.Made of corrosion resistant surface for durabilityInstructionsNon-Ratchet Type: Remove the closed lock to open the handlesRatchet Type: Squeeze the handles until it stops to open the handles.Directions for Usage1. Cutting modular cable:Place the single bladed side of the tool's cutter facing you and cut the modular cable to the desired length. Make sure to cut the ends of the cord straight across, not diagonally.2. Stripping modular cable:2a. Insert 4P/6P cable into the two-bladed side of the tool's stripperuntil it touches the stop guide.2b. Insert 8P/10P cable into the two-bladed side of the tool's stripper and let it extend a little past the lower cut blade.3. Squeeze handles until it stops, cable must be kept perpendicular and then pull from the tool.4. Remove the outer jacket, insert the stripped cable into the plug and be sure the left wire at one end matches the right wire at the other end5. Place modular plug with cable into the tool shoulder. Be sure the stripped wire is between the tab and gold contacts. Squeeze handles until it stops6. Remove the crimped plug from the tool7. Ror stripping UTP/STP round cable, please use HT-S501A for good result