3 Review(s)

This is 0.96 Inch Blue OLED Display Module This Work perfectly well without the need of back light.This OLED Display Module has 128*64 high resolution, ultra wide viewing angle.Super low power consumption–only 0.08W when the whole screen lights up and 0.06W when displaying characters.This is Fully compatible with multiple controlling chips including Arduino and more.This OLED Display Module Support a wide range of voltage input.0.96 Inch Blue OLED Display Module SPI/I2C – 4pinThis is the 0.96 inch OLED display module, it is made of 128×64 individual blue OLED pixels, and each one is turned on or off by the controller chip.It works without a backlight, that is, in a dark environment OLED display module is higher compared to that of LCD display you will like the miniature for its crispness.The driver chip of this OLED is SSD1306, which is compatible with I2C communication. This is an I2C OLED display, So this module can be controlled by I2C.That is, except for the VCC and GND, 2 wires would be needed when using 4-wires I2C mode.There is also a simple switch-cap charge pump that turns 5v into a low-voltage drive for the OLEDs, making this module the easiest way to get an OLED display module into your project. OLED is self-luminous, with no backlight.OLED (Organic Light-Emitting Diode) is a self-light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode.In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays.If you want to use this OLED display module in your Arduino project, that you will need a few essential components like