3 Review(s)

This USB 2.0 to IDE / SATA drive adapter implements a bridge between a USB port and one SATA, ATA or ATAPI based mass storage device port. his USB hard drive adapter could turns any standard IDE or SATA drive into a convenient external drive. Easily transfer files from computer or notebook, back up files, or store large file archives on hard drives. he Hi-Speed USB interface provides for easy installation with its Plug and Play design. The ide to USB adapter supports all existing IDE/ATAPI devices such as a CD-ROM, CD-RW, DVD-ROM and 2.5 and 3.5 IDE and SATA hard drives. Functions: Anytime when you hope to recover some precious data from a old hard disk taken from an old dead computer, this SATA to USB adapter would just be a great choice for data transferring to a new computer. You just simply connect them together, insert the Power Plug, the hard drive will be spinning up, then you can transfer the data out to your new computer. Plug and Play, No driver needed. Unique designed SATA/IDE adapter support 2.5'',3.5'' SATA/IDE Hard Disk for PC Laptop Desktop, compatible with all Computer System, so that you have no worry about the Compatibility Problem. In addition, with this adapter set you could also make a SATA drive into a convenient external hard drive. Hardware Install: Confirm device is under master mode. Connect SATA/IDE connector to SATA/IDE device. Connect AC power to SATA/IDE device. Connect cable to USB port of computer. Driver Install: Window98: Insert Driver CD to CDROM and run X:win98setup.exe before you insert the cable to your computer. Windows2000/me/XP: You don't need to install any driver. MaK 8.6 or higher: Copy USB SATA/IDE_05E3_0702. sit to desk to desk to double click it to get driver file. Then copy the driver file to [System Folder][Extensions]. After that, connect cable to computer and reboot the system. Connect to the IDE device using USB interface and SATA device too USB 2.0 standard, Full speed, 480M bps full speed Transfer rate up to 480MBps (USB 2.0 specification), limit depend on the IDE device/SATA device and the driver USB 1.1 device interface can be use, (Backward compatible to USB 1.1) Complies with ATA/ATAPI-66 Specification 1.0 Easy to use and plug & play Supports SATA Hard Disk / ATA/ATAPI CD-ROM/R/RW DVD-ROM (based on ATAPI spec.) External power adapter included, for power up the 12V IDE/ATAPI devices Usage