3 Review(s)

1.Clean the window thoroughly. Make sure it is smooth and clean and free of any dust.2.Measure the size of the window and trim the film to the desired size. Leave an extra 1-2 cm margin on each side to allow for adjustment.3.Peel off the transparent protective film. If it is difficult to remove the protective film, you can rub the corner of the film for a while to make it easier to peel off the backing. Make sure you have removed the protective film before installation. (Very important!!!)4.Spray plenty of water on both the smooth side of the film and the windows.5.Install the smooth side of the window film onto the window.6.Use a squeegee or cleaning cloth to remove excess water and any air bubbles, making sure there are no air bubbles or water left behind.7.Cut off the excess window film.8.Wipe clean the surface of the installed window film. And you are well done!