Eja Little Catty On Branch (Wall Sticker) | Zipri.in
                      Eja Little Catty On Branch (Wall Sticker)

Eja Little Catty On Branch (Wall Sticker)

Quick Overview

Rs. on ShopcluesBuy
Product Price Comparison

Little catty on branch wall decal is an eye catchy wall d?cor which brighten your boring walls attractive and cute.This fills a life to the room specially for kids room. 1). The surface you wish to attach your decal must be clean and free from dust grease or any other contamination. 2). Simply peel those pre-cut pieces of wall stickers off from backing paper and apply them on the desired area. Freshly painted or lacquered surfaces must be allowed to completely cure before the decal is applied. We recommend waiting for minimum of 2-3 weeks. 3). Press firmly to squeeze out any air bubbles. Please Note: It will be helpful and fun if you take help of your friends or family members to stick the wall decals on your wall. 4). Do not apply on wet walls


These wall stickers decorate your home just in minutes. Easy installation. The surface you wish to attach your decal must be clean and free from dust, grease or any other contamination. Simply peel those pre-cut pieces of wall stickers off from the backing paper and apply them to the desired area. Refer to the finished design shown in between the sheet and follow the numbers mentioned on the pieces to form the desired pattern. Freshly painted or lacquered surfaces must be allowed to completely cure for minimum 30 days before the decal is applied. After pasting the wall stickers on your wall, press firmly along the border and remove air bubbles if any. Repeat, if required. Do not apply on wet walls. It will be helpful and fun if you take help of your friends or family members. Ideal for family lounge, hall, bedroom, cafe and restaurant, kids room, nursery room etc.

 

 
 


 

 

 

Make sure the wall surface is smooth, free of moisture, dust and dirt.

 

Gently and carefully peel out the pre-cut pieces.

  

Follow the numbers mentioned on the pre-cut pieces and join them to form the pattern.

 

 

 
 


 

 

 

Press firmly along the border of the wall stickers to ensure no loose edges.

 

Voila! You did it.

         

If you notice any air bubbles, you can use a pin or needle to prick and squeeze out the air.

 

Voila! You did it.